Jelly Belly Minnow

The Jelly Belly Minnow is a versatile baitfish imitation developed by Marc Griffiths, originally to imitate juvenile anchovies targeted by feeding kahawai (Australian salmon).

Jelly Belly Minnow and hook

Its defining feature is a belly formed from clear Stretch Cord, which gives the fly a distinctive rounded, translucent appearance. Combined with a sparse flash lateral line and a layered synthetic hair wing, the result is a slim, lively baitfish profile.

Although originally developed for saltwater fishing, the Jelly Belly Minnow is equally suitable for imitating other small baitfish, including smelt, juvenile sardines and freshwater whitebait.

Its versatile design also makes it easy to adapt to different fishing conditions and target species. Experimenting with different belly and wing colours allows the pattern to be adapted to local conditions and the baitfish being imitated.

Furthermore, experimenting with different colour combinations can produce some interesting variations. For example, pink Stretch Cord or brighter wing colours can create a more noticeable fly when conditions call for something a little more conspicuous.


Materials

  • Hook:Mustad SS71Z / 34007, sizes 8-4
  • Thread:Ultra-clear mono
  • Belly:Clear Stretch Cord, 0.8-1.2 mm diameter, depending on hook size
  • Rib (optional):Fine silver Mylar
  • Wing:Unique Hair in tan, olive or chartreuse over smoke
  • Flash:1-2 strands of Crystal Flash; 2-4 strands of silver Spiral Mylar
  • Eyes:Stick-on eyes
  • Body coating:Light-cured acrylic resin or five-minute epoxy
  • Finish:Sally Hansen’s Hard as Nails

Tying Notes

  • Wing material: Neer Hair can also be used as an alternative to Unique Hair.
  • Belly: Pink Stretch Cord is another option for creating a brighter, more visible belly.
  • Optional Mylar rib: If you wish to include the ribbing, secure the Mylar along the hook shank before winding on the Stretch Cord. Once the cord is installed, wind the Mylar forward between the cord wraps. This technique works particularly well on larger flies.
  • Eyes: Secure the stick-on eyes with a small amount of Super Glue or Selleys Kwik Grip to help keep them in place.
  • Resin body and finish: After applying the resin or epoxy, finish the fly with a coat of Sally Hansen’s Hard as Nails. Allow the finish to dry thoroughly in a sunny spot before using the fly.
  • Alternative body coatings: Selleys All Clear is an inexpensive alternative to epoxy, although it requires considerably longer to cure.
    A bowl of soapy water is useful when working with this material: dip your fingers into the soapy water, then use them to gently shape the coating to the desired profile. Leave the fly in a sunny spot for approximately 24 hours to cure fully before applying a final coat of Sally Hansen’s Hard as Nails. Alternatively, Selleys Araldite Ultra Clear can also be used as a clear, durable coating.

How To Tie the Jelly Belly Minnow

Download tying instructions

Jelly Belly Minnows

Silver flash tied onto the hook shank of a Jelly Belly Minnow
Step 1 – Add the Underbody Flash

Wrap a strand of flash around the hook shank to provide a little sparkle beneath the Stretch Cord. Secure it and trim the excess.

Clear Stretch Cord wound forward in close turns to create the rounded Jelly Belly Minnow belly
Step 2 – Tie in the Stretch Cord

Secure the cord along the hook shank, tying it down from the head towards the bend. Wind the cord forward in close, even turns. Apply some tension towards the tail, relaxing it as you approach the head. This creates a slightly thicker profile towards the front. Secure behind the hook eye with a couple of half-hitches and a small drop of super glue.

Fine silver Mylar wound between the clear Stretch Cord wraps to add flash to the belly
Step 3 – Add the Optional Mylar Rib

For additional belly flash, secure a length of fine silver Mylar before winding the Stretch Cord. Once the cord is in place, wind the Mylar forward between the cord wraps. This works particularly well on larger flies.

Smoke-coloured Unique Hair tied onto the hook behind the eye, with silver flash added
Step 4 – Tie in the Lower Wing

Attach the lighter-coloured Unique Hair (tan, olive or chartreuse) at the head. Aim for a wing approximately three to four times the length of the hook shank. You can leave it longer at this stage and trim it to match the baitfish you are imitating.

Smoke-coloured Unique Hair tied onto the hook behind the eye, with silver flash added
Step 5 – Add the Lateral Line

Tie in one or two strands of Crystal Flash, keeping them approximately the same length as the wing. This provides a subtle reflective lateral line.

Unique Hair folded back over itself and secured to form the Jelly Belly Minnow wing
Step 6 – Add the Dark Upper Wing

Tie in the smoke-coloured Unique Hair over the lighter wing. Secure the materials firmly, whip finish and apply a small amount of super glue to the thread wraps.

Olive or tan Unique Hair upper wing added with stick-on eyes and red gill markings
Step 7 – Attach the Eyes

Position the stick-on eyes on either side of the head. Secure them with a small amount of super glue or Selleys Kwik Grip to help prevent them coming loose during the resin coating process.

Olive or tan Unique Hair upper wing added with stick-on eyes and red gill markings
Step 8 – Add the Gill Markings

If desired, apply a small red mark immediately behind the eyes to suggest the gills.

Completed Jelly Belly Minnow with resin-coated body, translucent belly and tapered baitfish wing
Step 9 – Coat the Body

Apply thin coats of light-cured acrylic resin or epoxy over the head and wing, building up the desired profile. Take care to achieve a smooth, even finish without adding excessive bulk.

Step 10 – Finish the Fly

Once the resin has cured, apply a coat of Sally Hansen’s Hard as Nails to seal and finish the surface. Leave the fly in a sunny spot to dry thoroughly before use.


A Variation: The All Clear Eyes Fly

The All Clear Eyes Fly uses a similar approach to the Jelly Belly Minnow, combining sparse translucent synthetic fibres with a clear-bodied construction to imitate small baitfish and fry.

Instead of a conventional body, this variation uses Selleys All Clear sealant, which is shaped directly around the hook shank to create a smooth, tapered minnow profile. Small black eyes provide a distinct focal point.

The technique is a little different from conventional fly tying, but offers an interesting alternative worth experimenting with.

Peter Glasson with an Australian salmon he caught with a JBM.

See Also

For more information about the Jelly Belly Minnow, its development and alternative tying techniques, see:


Related Posts

  • Foam minnow
    Phil Crowley's Foam Minnow is a versatile baitfish imitation featuring a tapered foam underbody, reflective Mylar piping and soft hackle…
  • Peter Glasson shares his favourite saltwater fly patterns and fishing tips for Gogley's Lagoon and Lake Cathie, targeting bream, whiting,…
  • Jelly Belly Bream Flies
    Discover two versatile bream fly patterns from Dawn “Hoppy” Hopkins: Hoppy’s Saltwater Worm and Jelly Belly Minnow. Featuring contrasting profiles,…
Julian Tapping
Julian Tapping
Articles: 328

Leave a Reply